CL680 Specifications:
 |
The SCT CL680
Card-Link acts like a disk drive, but uses PCMCIA cards
instead of floppy disks. The CL680 connects to the parallel printer port of any PC or compatible; may share a port with a printer by adding a mechanical switch box. |
The CL680.SYS device driver makes the CL680 look like a drive to the host PC. It will appear as the next available drive letter. The device driver sign-on line will display the drive letter selected. Thereafter, it's treated like a disk drive. Most all dos commands(such as COPY, DEL, DIR etc.) work on the CL680 the same as on floppy drives.
The card drive uses a unique combination of hardware and software to provide a link between a PC compatible parallel port and a PCMCIA memory card.
SPECIFICATIONS
Size: 4in. x 1in. x 6in.
Weight: 1lb.
Power: 15 VDC (Supplied with 120 VAC to 15VDC Adapter)
Data Transfer Rate: 80,000 Bytes per Sec.(Depends on CPU speed)
LEDs: Activity, low battery
Installation: Connect to Parallel port with supplied cable, connect power cord adapter, run install program, re-boot computer and use like disk drive.
Program disk type: 3.5 inch disk are supplied unless otherwise instructed. Free disk exchange from SCT it you need 5.25 inch disk.
The CL680 in compatible with Stacker, Windows 3.1 and ACE double card. Supports memory cards up to 64 MB. Accepts Type II cards. Programs Sundisk and Intel flash cards.
To order your CL680, call SCT and order with Visa or MasterCard, or print the Order Form and mail it to SCT.
FCC Class B Approved
CL682 Specifications:
The CL682 is the similar to the CL680 except that it can use 2 PCMCIA cards OR a hard disk drive.To order your CL682, call SCT and order with Visa or MasterCard, or print the Order Form and mail it to SCT.
CL683 Specifications:
The CL683 is the similar to the CL680 except that it can use 2 PCMCIA cards AND a hard disk drive.To order your CL682, call SCT and order with Visa or MasterCard, or print the Order Form and mail it to SCT.
